当前位置:首页 >> 机械/仪表 >>

CS-HG31调试手册 SI-0077A-005-ENG


SI-0077A-005-00

General Safety Information
WARNING
? Check that the wheels are fastened securely before riding the bicycle. If the wheels are loose in any way, they may come off the bicycle and serious injury may result. ? Obtain and read the service instructions carefully prior to installing the parts. Loose, worn or damaged parts may cause the bicycle to fall over and serious injury may occur as a result. We strongly recommend only using genuine Shimano replacement parts. ? Obtain and read the service instructions carefully prior to installing the parts. If adjustments are not carried out correctly, the chain may come off and this may cause you to fall off the bicycle which could result in serious injury. ? Read these Technical Service Instructions carefully, and keep them in a safe place for later reference.

Cassette sprocket tooth combination < MTB >
Gears 9 Group name bo bn an 8 ao aw bf ac 7 E / bm bp Tooth combination 11, 13, 15, 17, 19, 21, 24, 28, 32T 11, 13, 15, 17, 20, 23, 26, 30, 34T 11, 13, 15, 17, 20, 23, 26, 30T11 , 11, 13, 15, 17, 20, 23, 26, 34T11 , 11, 13, 15, 18, 21, 24, 28, 32T11 , 11, 13, 15, 17, 19, 21, 24, 28T11 , 11, 13, 15, 18, 21, 24, 28T11 ,11 , 12, 14, 16, 18, 21, 24, 28T11 ,11 , 12, 14, 16, 18, 21, 26, 32T11 ,11 ,

< ROAD >
Gears Group name S T 8 U V W Tooth combination 12, 13, 14, 15, 16, 17, 19, 21T 13, 14, 15, 16, 17, 19, 21, 23T 12, 13, 14, 15, 17, 19, 21, 23T 13, 14, 15, 17, 19, 21, 23, 26T 12, 13, 15, 17, 19, 21, 23, 25T

Installation of the sprockets
Note
? Always be sure to use the sprocket set bearing the Group marks same group marks. Never use in combination with a sprocket bearing a different group mark. ? Be sure to read the service instructions for the Rear Drive System in conjunction with these service instructions. ? Parts are not guaranteed against natural wear or deterioration resulting from normal use. ? For maximum performance we highly recommend Shimano lubricants and maintenance products. ? For any questions regarding methods of installation, adjustment, maintenance or operation, please contact a professional bicycle dealer.
ag - 18T
ag -15
T
SH IM

9-gears <MTB>

8-gears <MTB/ROAD>

ag -1

3T

For each sprocket, the surface that has the group mark should face outward and be positioned so that the triangle (U) mark on each sprocket and the A part (where the groove width is wide) of the freewheel body are aligned.
Lock ring

Technical Service Instructions

SI-0077A-005

Cassette sprocket
For installation of the HG sprockets, use the special tool (TL-LR15 / LR10) to tighten the lock ring. To replace the HG sprockets, use the special tool (TLLR15 / LR10) and TL-SR21 to remove the lock ring.

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222

3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

* Service Instructions in further languages are available at : http://techdocs.shimano.com
Please note: specifications are subject to change for improvement without notice. (English) ? Mar. 2011 by Shimano Inc. XBC IZM Printed in Singapore.

O AN

HYPERGL I DE - C

7-gears <MTB> A
The groove is wide at one place only.

ac -14T

U mark

Lock ring

Assembly Tightening torque: 30 - 50 N·m {261 - 434 in. lbs.}
Tool (TL-SR21)

TL-LR15 / LR10

TL-LR15 / LR10

Disassembly


相关文章:
更多相关标签: