当前位置:首页 >> 计算机软件及应用 >>

Netbackup 7.5 Master安装配置

Netbackup Master 安装配置 Master : 192.168.1.20 Vtl: 192.168.1.225 Clinet: 192.168.1.40

1, VTL 通过 ISCSI 将驱动器映射给 Mast
1,Mast 通过 ISCSI 发起连接:
iscsiadm --mode discovery --type sendtargets --portal 192.168.1.225 查询 iscsi 启动器名称: [root@master ~]# cat /etc/iscsi/initiatorname.iscsi InitiatorName=iqn.1994-05.com.redhat:a4dda960657

2,VTL 创建一个 CLIENT 连接,命名为 Master

3,给新建立的 Master 创建目标

4,分配磁带库给 Master 主机

5,确认 Master 主机分配资源

6, Master 主机登录 iscsi 节点
[root@master ~]# iscsiadm --mode discovery --type sendtargets --portal 192.168.1.225 [root@master ~]# iscsiadm --mode node -T iqn.2000-03.com.falconstor:vtl.FS5U7IBM3650VTL014.master-5 -p 192.168.1.225 -l

7, Mast 主机的设备管理器上应该能看到磁带驱动器

2,软件安装
2.1 软件安装
本次软件安装介质为:NetBackup_7.5_LinuxR_x86_64.tar.gz,解压软件包运行 install [root@master NetBackup_7.5_LinuxR_x86_64]# ls Doc install LICENSE linuxR_x86 [root@master NetBackup_7.5_LinuxR_x86_64]# ./install Symantec Installation Script Copyright 1993 - 2012 Symantec Corporation, All Rights Reserved. Installing NetBackup Server Software Please review the SYMANTEC SOFTWARE LICENSE AGREEMENT located on the installation media before proceeding. The agreement includes details on the NetBackup Product Improvement Program. For NetBackup installation and upgrade information specific to your platform and to find out if your installed EEBs or hot fixes are contained in this release, check out the Symantec Operations Readiness Tools (SORT) Installation and Upgrade Checklist and Hot fix and EEB Release Auditor, respectively, at https://sort.symantec.com/netbackup. ATTENTION! To help ensure a successful upgrade to NetBackup 7.5, please visit the NetBackup 7.5 Upgrade Portal: http://www.symantec.com/docs/TECH74584. Do you wish to continue? [y,n] (y) Participate in the NetBackup Product Improvement Program? [y,n] (y) NOTE: Could not download https://telemetrics.symantec.com/data/uploader/nbupload.conf. , cannot connect to telemetrics.symantec.com:443. Unable to download file or determine URL

The NetBackup and Media Manager software is built for use on LINUX_RH_X86 hardware. Do you want to install NetBackup and Media Manager files? [y,n] (y) NetBackup and Media Manager are normally installed in /usr/openv. Is it OK to install in /usr/openv? [y,n] (y) Saving server binaries for LINUX_RH_X86. Reading NetBackup files from /root/NetBackup_7.5_LinuxR_x86_64/linuxR_x86/anb Checking for pre-existing SYMCnetbp package. Installing SYMCnetbp package. Installation of SYMCnetbp was successful. More details regarding SYMCnetbp can be found in file /tmp/install_netbppkg_trace.2248 on master. openv/netbackup/client/Linux/ openv/netbackup/client/Linux/SuSE2.6.16/ openv/netbackup/client/Linux/SuSE2.6.16/client_config openv/netbackup/client/Linux/SuSE2.6.16/cp_to_client openv/netbackup/client/Linux/SuSE2.6.16/extract_java openv/netbackup/client/Linux/SuSE2.6.16/install_client openv/netbackup/client/Linux/SuSE2.6.16/ftp_to_client openv/netbackup/client/Linux/SuSE2.6.16/sftp_to_client openv/netbackup/client/Linux/SuSE2.6.16/ssh_to_client openv/netbackup/client/Linux/SuSE2.6.16/move_libs openv/netbackup/client/Linux/SuSE2.6.16/version openv/netbackup/client/Linux/SuSE2.6.16/pddeagent.tar.gz openv/netbackup/client/Linux/SuSE2.6.16/pdinstall openv/netbackup/client/Linux/SuSE2.6.16/PBX.tar.gz openv/netbackup/client/Linux/SuSE2.6.16/installpbx openv/netbackup/client/Linux/SuSE2.6.16/tar openv/netbackup/client/Linux/SuSE2.6.16/nbj.conf openv/netbackup/client/Linux/SuSE2.6.16/JRE.tar.gz openv/netbackup/client/Linux/SuSE2.6.16/.sizes_JRE openv/netbackup/client/Linux/SuSE2.6.16/client_bin.tar.gz openv/netbackup/client/Linux/SuSE2.6.16/.sizes_client_bin openv/netbackup/client/Linux/SuSE2.6.16/.sizes openv/netbackup/client/Linux/SuSE2.6.16/NB-Java.tar.gz openv/netbackup/client/Linux/SuSE2.6.16/.sizes_NB-Java openv/netbackup/client/Linux/RedHat2.6.18/ openv/netbackup/client/Linux/RedHat2.6.18/client_config openv/netbackup/client/Linux/RedHat2.6.18/cp_to_client openv/netbackup/client/Linux/RedHat2.6.18/extract_java openv/netbackup/client/Linux/RedHat2.6.18/install_client openv/netbackup/client/Linux/RedHat2.6.18/ftp_to_client openv/netbackup/client/Linux/RedHat2.6.18/sftp_to_client openv/netbackup/client/Linux/RedHat2.6.18/ssh_to_client openv/netbackup/client/Linux/RedHat2.6.18/move_libs

openv/netbackup/client/Linux/RedHat2.6.18/version openv/netbackup/client/Linux/RedHat2.6.18/pddeagent.tar.gz openv/netbackup/client/Linux/RedHat2.6.18/pdinstall openv/netbackup/client/Linux/RedHat2.6.18/PBX.tar.gz openv/netbackup/client/Linux/RedHat2.6.18/installpbx openv/netbackup/client/Linux/RedHat2.6.18/tar openv/netbackup/client/Linux/RedHat2.6.18/nbj.conf openv/netbackup/client/Linux/RedHat2.6.18/JRE.tar.gz openv/netbackup/client/Linux/RedHat2.6.18/.sizes_JRE openv/netbackup/client/Linux/RedHat2.6.18/client_bin.tar.gz openv/netbackup/client/Linux/RedHat2.6.18/.sizes_client_bin openv/netbackup/client/Linux/RedHat2.6.18/.sizes openv/netbackup/client/Linux/RedHat2.6.18/NB-Java.tar.gz openv/netbackup/client/Linux/RedHat2.6.18/.sizes_NB-Java openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/ openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/client_config openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/cp_to_client openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/extract_java openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/install_client openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/ftp_to_client openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/sftp_to_client openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/ssh_to_client openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/move_libs openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/version openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/PBX.tar.gz openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/installpbx openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/tar openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/nbj.conf openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/JRE.tar.gz openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/.sizes_JRE openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/client_bin.tar.gz openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/.sizes_client_bin openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/.sizes openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/NB-Java.tar.gz openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/.sizes_NB-Java openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/ openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/client_config openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/cp_to_client openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/extract_java openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/install_client openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/ftp_to_client openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/sftp_to_client openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/ssh_to_client openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/move_libs

openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/version openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/PBX.tar.gz openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/installpbx openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/tar openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/client_bin.tar.gz openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/.sizes_client_bin openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/.sizes openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/ openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/client_config openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/cp_to_client openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/extract_java openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/install_client openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/ftp_to_client openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/sftp_to_client openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/ssh_to_client openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/move_libs openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/version openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/PBX.tar.gz openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/installpbx openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/tar openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/client_bin.tar.gz openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/.sizes_client_bin openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/.sizes openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/ openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/client_config openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/cp_to_client openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/extract_java openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/install_client openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/ftp_to_client openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/sftp_to_client openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/ssh_to_client openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/move_libs openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/version openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/PBX.tar.gz openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/installpbx openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/tar openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/nbj.conf openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/JRE.tar.gz openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/.sizes_JRE openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/client_bin.tar.gz openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/.sizes_client_bin openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/.sizes openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/NB-Java.tar.gz openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/.sizes_NB-Java

openv/netbackup/client/Linux/Debian2.6.18/ openv/netbackup/client/Linux/Debian2.6.18/client_config openv/netbackup/client/Linux/Debian2.6.18/cp_to_client openv/netbackup/client/Linux/Debian2.6.18/extract_java openv/netbackup/client/Linux/Debian2.6.18/install_client openv/netbackup/client/Linux/Debian2.6.18/ftp_to_client openv/netbackup/client/Linux/Debian2.6.18/sftp_to_client openv/netbackup/client/Linux/Debian2.6.18/ssh_to_client openv/netbackup/client/Linux/Debian2.6.18/move_libs openv/netbackup/client/Linux/Debian2.6.18/version openv/netbackup/client/Linux/Debian2.6.18/pddeagent.tar.gz openv/netbackup/client/Linux/Debian2.6.18/pdinstall openv/netbackup/client/Linux/Debian2.6.18/PBX.tar.gz openv/netbackup/client/Linux/Debian2.6.18/installpbx openv/netbackup/client/Linux/Debian2.6.18/tar openv/netbackup/client/Linux/Debian2.6.18/nbj.conf openv/netbackup/client/Linux/Debian2.6.18/JRE.tar.gz openv/netbackup/client/Linux/Debian2.6.18/.sizes_JRE openv/netbackup/client/Linux/Debian2.6.18/client_bin.tar.gz openv/netbackup/client/Linux/Debian2.6.18/.sizes_client_bin openv/netbackup/client/Linux/Debian2.6.18/.sizes openv/netbackup/client/Linux/Debian2.6.18/NB-Java.tar.gz openv/netbackup/client/Linux/Debian2.6.18/.sizes_NB-Java Done executing NB.inst. If you ran NB.inst instead of <cdrom_path>/install, you must run /usr/openv/netbackup/bin/install_bp to initiate NetBackup. Running /usr/openv/netbackup/bin/install_bp Copying RedHat2.6.18 Client Binaries Installing PBX... Please wait while installation is in progress... Installation completed Successfully Installation log located here: /var/tmp/installpbx-2779-010815143509.log Unpacking SYMCnbclt package. Checking for pre-existing SYMCnbclt package. Installing SYMCnbclt package. Installation of SYMCnbclt was successful. More details regarding SYMCnbclt can be found in file /tmp/install_cltpkg_trace.2763 on master. Terminating NetBackup and/or Media Manager processes. Installing NB-Java. Unpacking SYMCnbjava package. Checking for pre-existing SYMCnbjava package. Installing SYMCnbjava package. Installation of SYMCnbjava was successful.

More details regarding SYMCnbjava can be found in file /tmp/install_javapkg_trace.3601 on master. Unpacking SYMCnbjre package. Checking for pre-existing SYMCnbjre package. Installing SYMCnbjre package. Installation of SYMCnbjre was successful. More details regarding SYMCnbjre can be found in file /tmp/install_jrepkg_trace.3601 on master. + /bin/cp ./nbj.conf /usr/openv/java Directory /usr/openv/logs does not exist. No log files to migrate. No previous install detected. Performing a fresh install. + Extracting PDDE server package (/usr/openv/pddeserver.tar.gz)... Using /tmp/pdde_pkg to store temporary package data. Unpacking SYMCpddes package. Checking for pre-existing SYMCpddes package. Installing SYMCpddes package. + Extracting PDDE agent package (/usr/openv/netbackup/client/Linux/RedHat2.6.18/pddeagent.tar.gz)... Using /tmp/pdde_pkg to store temporary package data. Unpacking SYMCpddea package. Checking for pre-existing SYMCpddea package. Installing SYMCpddea package. Creating /etc/pdregistry.cfg. Saving a copy of the uninstall script to /opt/pdde/pddeuninstall.sh Starting setup for PDDE script pdregistry.cfg exists. Done setup for PDDE script Checking to see if the PDDE configuration needs upgrading Agent config file path found: {/etc/puredisk/Agent.cfg} Making changes to /usr/openv/lib/ost-plugins/pd.conf RESTORE_DECRYPT_LOCAL already in pd.conf PREFETCH_SIZE already in pd.conf META_SEGKSIZE already in pd.conf Making changes to /usr/openv/lib/ost-plugins/pd.conf FIBRECHANNEL already in pd.conf PDDE install finished successfully. Version now installed: 7.0000.0012.0118 Full PDDE installation log saved to: /var/log/puredisk/2015-01-08_14:36-pdde-install.log The following automatic startup and shutdown scripts (respectively) have been installed. They will cause the NetBackup daemons to be automatically shut down and restarted each time the system boots.

/etc/rc.d/rc2.d/S77netbackup /etc/rc.d/rc3.d/S77netbackup /etc/rc.d/rc5.d/S77netbackup /etc/rc.d/rc0.d/K01netbackup /etc/rc.d/rc1.d/K01netbackup /etc/rc.d/rc6.d/K01netbackup

Installation of Java LiveUpdate agent succeeded. Refer to file /tmp/JLU-Log/JavaLiveUpdate-Install.log on master for installation details. Checking LiveUpdate registration for the following products: NB CLT This may take a few minutes. Product NB is installed and will be registered. Product CLT_Linux-PSERIES is installed and will be registered. Product CLT_Linux-ZSERIES is installed and will be registered. Updating LiveUpdate registration now...this may take some time. A NetBackup Server or Enterprise Server license key is needed for installation to continue. Enter license key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx All additional keys should be added at this time. Do you want to add additional license keys now? [y,n] (y) License Key Utility ------------------A) Add a License Key D) Delete a License Key F) List Active License Keys L) List Registered License Keys H) Help q) Quit License Key Utility Enter a letter: q 选择 q 退出选择 Installing NetBackup Enterprise Server version: 7.5 If this machine will be using a different network interface than the default (master), the name of the preferred interface should be used as the configured server name. If this machine will be part of a cluster, the virtual name should be used as the configured server name. Would you like to use "master" as the configured NetBackup server name of this machine? [y,n] (y) Is master the master server? [y,n] (y) 输入 key

Media servers can be added during this installation or to a NetBackup environment after installation completes. Refer to the NetBackup Administrator's Guide, Volume I for more information. Do you want to add any media servers now? [y,n] (n) Checking network connections. bp.conf: IP_ADDRESS_FAMILY = AF_INET: default value, no update needed TELEMETRY_UPLOAD value YES saved. Sending SIGHUP to inetd process. NetBackup maintains a centralized catalog (separate from the image catalog) for data related to media and device configuration, device management, storage units, hosts and host aliases, media server status, NDMP credentials, and other information. This is managed by the Enterprise Media Manager server. Enter the Enterprise Media Manager server (default: master): Converting STREAMS files. This may take a few minutes. STREAMS files conversion is complete. Successfully updated the session cache parameters. Starting the NetBackup network daemon. Starting the NetBackup client daemon. Starting the NetBackup SAN Client Fibre Transport daemon. Creating /usr/openv/tmp/sqlany Installed SQL Anywhere Version 11.0.1.2645 Installation completed successfully set_value: Key "AZDBPasswordFilePath" successfully updated AZ database setup complete. Database server is NB_master Creating the NetBackup database. Creating NetBackup staging directory in: /usr/openv/db/staging Starting the NetBackup database. Authenticating the NetBackup database. VXDBMS_NB_DATA entry in bp.conf updated successfully. Setting of database authentication for NBDB successful. Change of dba password for NBDB successful. Creating the NetBackup database files. Creating the NetBackup database schema. Verifying the running version of NBDB ... NBDB version 7.5.0.0 verified. Nothing to upgrade. Version unchanged. Database [NBDB] validation successful. Database [NBDB] is alive and well on server [NB_master]. Creating the NetBackup Authorization database. Migrating SLP definitions into the NetBackup relational database.

Starting the NetBackup Event Manager. Starting the NetBackup Audit Manager. Starting the NetBackup Deduplication Manager. Starting the NetBackup Deduplication Engine. Starting the NetBackup database manager process (bpdbm). Creating Directive Set for LotusNotes Creating Directive Set for MS_Exchange_Mailbox Creating Directive Set for MS_Exchange_Database Creating Directive Set for MS_Exchange_Public_Folders Creating Directive Set for MS_Exchange_Database_Availability_Groups Creating Directive Set for MS_SharePoint_Portal_Server Creating Template Set for Oracle_RMAN Creating Template Set for Oracle_XML_Export Creating Template Set for DB2 Creating Directive Set for Windows2003 Creating Directive Set for Windows2008 Creating Directive Set for Enterprise_Vault_7.5 Creating Directive Set for Enterprise_Vault_8.0 Creating Directive Set for Enterprise_Vault_9.0 Creating Directive Set for Enterprise_Vault_10.0 Creating Directive Set for NB_SearchServer Creating Directive Set for NDMP Converting snapshot policies: Policy conversion summary: Number of original policies: 0 Number of non-snapshot policies skipped: 0 Number of policies not needing conversion: 0 Number of policies converted to 'auto' snapshot method: 0 Number of policies converted: 0 Updating client hardware definitions: Hardware update conversion summary: Number of policies processed: 0 Number of policies with affected clients: 0 Number of clients processed: 0 Number of clients converted: 0 Number of Disaster Recovery flags cleared: 0 Starting the NetBackup compatibility daemon. Starting the NetBackup Enterprise Media Manager. Starting the NetBackup Resource Broker. Populating the database tables. This will take some time. Starting the Media Manager device daemon processes.

Do you want to start the job-related NetBackup daemons so backups and restores can be initiated? [y,n] (y) Starting the NetBackup request daemon process (bprd). Starting the NetBackup Job Manager. Starting the NetBackup Policy Execution Manager. Starting the NetBackup Storage Lifecycle Manager. Starting the NetBackup Indexing Manager. Starting the NetBackup Remote Monitoring Management System. Starting the NetBackup Key Management daemon. Starting the NetBackup Service Layer. Starting the NetBackup Agent Request Server. Starting the NetBackup Bare Metal Restore daemon. Starting the NetBackup Vault daemon. Starting the NetBackup CloudStore Service Container. Starting the NetBackup Service Monitor. Starting the NetBackup Bare Metal Restore Boot Server daemon. OpsCenter is the next-generation monitoring, reporting and administrative solution designed to centrally manage one or more NetBackup installations from a web browser. Existing NetBackup Operations Manager or Veritas Backup Reporter installations can be upgraded to OpsCenter. If an OpsCenter server already exists in your environment or you plan to install one, enter the real hostname of that OpsCenter server here. Do not use a virtual name. If you do not want this local machine to be an OpsCenter server, enter NONE. Enter the OpsCenter server (default: NONE): NetBackup server installation complete. NOTE: Could not download https://telemetrics.symantec.com/data/uploader/nbupload.conf. , cannot connect to telemetrics.symantec.com:443. Unable to download file or determine URL File /usr/openv/tmp/install_trace.2130 contains a trace of this install. That file can be deleted after you are sure the install was successful. [root@master NetBackup_7.5_LinuxR_x86_64]#

2.2 搜索带库中的机械手和驱动器

查看结果:

2.3 编制 ROBOT 管理的槽位目录(Inventory Robot)

查看结果:

2.4,建立 volume pool(添加磁带)

2.5 ,建立新的 storage unit

2.6 建立 policy
添加客户端,并指定策略。

选择对应的备份类型和 Policy volume pool:

输入 client name: (/etc/hosts)

查询 client 连接状态:

2.7 备份和恢复文件测试 2.7.1 手动开始备份

2.7.2

恢复测试


相关文章:
Netbackup 7.5 Master安装配置.doc
Netbackup 7.5 Master安装配置_计算机软件及应用_IT/计算机_专业资料 暂无评价|0人阅读|0次下载|举报文档 Netbackup 7.5 Master安装配置_计算机软件及应用_IT/计算机...
Symantec NetBackup 7.5培训-基础知识、安装配置和实验....ppt
Symantec NetBackup 7.5培训-基础知识、安装配置和实验_计算机软件及应用_IT/...Netbackup Server既当Master Server又当 Media Server,Netbackup Server不支持Client...
SYMANTEC NBU 7.5 安装配置说明(for linux)_图文.doc
Symantec NetBackup 7.5 安装配置说明 介质下载首 先通过 URL: https://www4....[y,n] (y) ---服务器主机名,默认即可 Is localhost the master server? ...
Nbu7.5安装_虚拟带库安装连接_备份测试.doc
NBU7.5 for Windows 安装 and vistor 虚拟带库配置 说明 发布 1 文档信息 1....然后选择:Netbackup Master Server 7. 默认即可,点击:NEXT 8. 界面显示的是 ...
NetBackup client7.5(Unix+ORACLE)安装.doc
NetBackup client7.5(Unix+ORACLE)安装 - Veritas Client for Unix 安装说明 目录一、安装 Unix Client 端程序 ...
netbackup_5220安装配置维护_图文.doc
netbackup_5220安装配置维护_计算机软件及应用_IT/计算机_专业资料。超详细...点击 NEXT。 7.7 设置主机角色,这里选择 master server。如果是设置 media ...
NetBackup安装图解教程.doc
NetBackup Master Server ”和“NetBackup Media Server ”就可以选择了,我们...NetBackup 安装是否成功,直接点击“下一步”, 提示我们 NetBackup 安装配置完成。...
Symantec NetBackup Appliance安装配置手册.doc
/etc/sysconfig/network # more ifcfg-bond0 BONDING_MASTER='yes' BONDING_...Symantec NetBackup 7.5... 116页 3下载券 netbackup_5220安装配置... 28页...
NetBackup配置使用指南(NBU配置使用指南).doc
NetBackup使用指南(NBU使用指南),NBU配置安装、使用...45 7.5 Duplicating(复制),Verifying(核查)和 ...(Master Server) NetBackup Host: whale Robot Type...
NetBackup配置使用指南.pdf
17 6 其它安装配置......45 7.5 Duplicating(复制),Verifying(核查)和 Importing(导入)操作 . 46 ...NetBackup 主服务器(Master Server)管理制定全网的...
nbu7.5备份VMware.doc
nbu7.5备份VMware - 1、 前提条件 1.1 Vmware 安装 VC,ESXI,虚拟主机并安装 vmtools 1.2 Netbackup 安装 netbackup7.5 ma...
Symantec Netbackup 7.0 安装和备份操作指南.doc
要在 MasterServer 上先将用于备份的存储设备加入设备列表,此处 先用本地磁盘,...Symantec NetBackup 7.6... 26页 免费 Symantec BE12.5安装配置... 33页 ...
Windows 平台 NBU LAN客户端安装步骤.doc
2. 确保待安装NBU 客户端的系统host文件中正确添加Master Server及Media sever信...3. 将相应的 NetBackup 安装软件包NetBackup_7.5_Win.zip传输至需要进行LAN备份...
NetBackup_Appliance安装配置.doc
初始化配置初始化过配置包括网络设定、时区时间设定、设备角色(master\media ...NetBackup 4页 免费 NetBackup 6.5 145页 1下载券 Symantec NetBackup 7.5......
NBU7.5备份VMware.doc
主机并安装 vmtools 1.2 Netbackup 安装 netbackup7.5 master server 并安装 ...3.配置恢复出的第一个虚拟机,添加已存在 VMDK,选择恢复出的第二个虚拟机的...
veritas netbackup 正式实施安装部署流程_图文.doc
注意:这里添写为master server计算机名。 单击安装 (Install) 后,安装过程开始并出现一个显示安装进度的屏幕。此过程可能需 要几分钟。 1.3配置 配置netbackup ...
Nbu7.5安装_虚拟带库安装连接_备份测试.doc
NBU7.5 for Windows 安装 and vistor 虚拟带库配置 说明 发布 1 文档信息 1....然后选择:Netbackup Master Server 7. 默认即可,点击:NEXT 8. 界面显示的是 ...
Netbackup7操作维护手册_图文.pdf
Veritas Netbackup 备份软件管理与操作 Veritas Netbackup 备份软件 安装配置和维 ...输入对 应的license key,然后点击[ NetBackup Master server ] 选项继续安装。 ...
NetBackup安装文档.doc
5.点击 NetBackup master server。 6.选择 typical 方式安装 => NEXT 7....在安装 VERITAS NetBackup 结束时,点击 Finish,进入 getting started,实现配置向导...
VERITAS NetBackup备份系统安装配置手册.doc
VERITAS NetBackup备份系统安装配置手册_IT/计算机_专业资料。VERITAS NetBackup6.0 ...3.1.1 安装 NetBackup Master Server 前准备 1,首先确认一下所要安装的系统...
更多相关标签: