当前位置:首页 >> 机械/仪表 >>

powershape中文教程


共有3篇贴子 只看楼主 收藏
楼主更新提醒我只收藏 PowerMILL等DELCAM软件的安装方法
fs34
正式会员5 1楼

近来很多朋友问我PM,也就是POWERMILL的安装方法,PM跟POWERSHAPE是同属于英国DELCAM公司的软件之一,功能相当强大,可惜国内是比较少人用。下面是安装的方法,部份是英文的(因为好像还没有中国人写过中文的,O(∩_∩)O哈哈~,我自己以前写过一份,不过找不到),所以现在我就懒得翻译了,还有问题你们自己解决吧,多识几次就OK了,再不行就别找我了哦,在讲这也是很简单的问题,我也不想再多讲,实在无意义,况且连个软件都装不好,你是否需要自我检讨呢?搞设计连个软件都搞不好,那就等於你去学修车,犯了个连螺丝刀都不会用一样的低级错误,呵呵!
With this FlexLM license you can run the next Delcam products (versions up to 5 Mach 2009 and lower)

PowerMILL
PowerSHAPE
CopyCAD
PowerInspect
PS-Exchange (Delcam Exchange)
Ductpost
PM-Post (PostProcessor)
FeatureCAM等的DELCAM公司软件同样有效。

1. FlexLM Server INSTALLATION

1.1 Delete if exist any Delcam PAF-fles from your computer (C:\dcam\config\pass\*.paf, C:\Program
Files\Common Files\Delcam\*.paf)

1.2 Copy folder "Flex" to any folder on computer wich suppose to be a License Sever. It can be your
own computer or any network computer.
Suppose you copy folder "Flex" to C:\Program Files\Delcam

1.3 Create and save System Variable "DELCAM_LICENSE_FILE=1700@hostname"

1700 is a port to used by Delcam FlexLM Server. If this port is already busy by another process
change it to any other in System Variable and license.lic too

"hostname" is a real name of computer where you are installing a Delcam FlexLM Server


1.3 For Windows XP (see pictures flexlm_1.jpg and
flexlm_2.jpg)

1.3.1 Create and configure Delcam FlexLM Servise
Run C:\Program Files\Delcam\Flex\lmtools.exe

1.3.1.1 Open "Config Servises" Tab

- Cofig Services > Service Name >input name DELCAM

- Path to the lmgrd.exe file > Browse > select "C:\Program Files\Delcam\Flex\lmgrd.exe" (it mast be
real path to Flex folder!)

- Path to the license file > Browse > select "C:\Program Files\Delcam\Flex\dcam.lic" (it mast be real
path Flex folder!)

- Path to the debug log file > Browse > select "C:\Program Files\Delcam\Flex\delcam.log" (it mast be
real path Flex folder!)

- Select options "Start Server at Power Up" and "Use Servise"

- Click "Save Servise"

1.3.1.2 Open "Start/Stop/Reread" Tab and click "Start Server"




2010-08-28 19:19回复举报 |

fs34
正式会员5 2楼


1.3.1.3 Close LMTOOLS

1.3.1.4 Reboot

1.4 For Windows Vista Windows7

On Windows Vista computers you can not install FlexLM as Service so you need to start FlexLM Server
in command line with CMD

- Run "lmstart.bat"

Attention!
Paths in "lmstart.bat" suppose that folder "Flex" is installed in "C:\Program Files\Delcam"
If you installed folder "Flex" in other location you have to edit paths in "lmstart.bat"

If you want that "lmstart.bat" will start automatically at Windows start-up just add a link to
"lmstart.bat" in Windows autorun folder


2. Delcam Application runing

Couse "license.lic" is a floating license file so with this Delcam FlexLM you can run Delcam
Application in two ways

1) As local installed ( Delcam Applications are installed on the same computers as a Delcam FlexLM
Server). In this case you can run on computer up to five copies of each Delcam Application
simultaneously

2) As network installed (( Delcam Applications are installed on the other (client) computers as a
Delcam FlexLM Server). In this case you can run any of Delcam Application on five client computers
simultaneously.

Attention! You do not need to install Delcam FlexLM Server on client computers, but you need to
create on them System Variable "DELCAM_LICENSE_FILE=1700@hostname", where "hostname" is a real
network name of computer with Delcam FlexLM Server running

经过以上步骤后,直接安装软件,启动LMTOOLS后,即刻打开软件正常使用!





相关文章:
powershape中文教程-简介_图文.pdf
标签: 中文教程| powershape中文教程-简介_机械/仪表_工程科技_专业资料。powershape中文教程 PowerSHAPE 1. 简介 Delcam PowerSHAPE 简介 Delcam PowerSHAPE 是一...
PowerSHAPE 2013中文教程 01-Introduction.pdf
PowerSHAPE 2013中文教程 01-Introduction_计算机软件及应用_IT/计算机_专业资料。PowerSHAPE 2013 1 简介 1. 简介 PowerSHAPE 简介 PowerSHAPE 是一个强大的 CAD ...
PowerSHAPE 2013中文教程06-Surface Editing.pdf
PowerSHAPE 2013中文教程06-Surface Editing_计算机软件及应用_IT/计算机_专业资料。PowerSHAPE 2013 6 曲面编辑 6. 曲面编辑 编辑 Power surface Power surface 是...
powershape中文教程简介02-线框.pdf
标签: 中文教程| powershape中文教程简介02-线框_机械/仪表_工程科技_专业资料。powershape中文教程 PowerSHAPE 2. 产生线框 2. 产生线框简介 PowerSHAPE 可在...
PowerSHAPE 2013中文教程07-Direct Solid Modelling_图文.pdf
PowerSHAPE 2013中文教程07-Direct Solid Modelling - PowerSHAPE 2013 7 实体直接建模 7.实体直接建模 简介 实体直接建模提供的工...
PowerSHAPE 2013中文教程11-Shading-ModelAnalysis.pdf
PowerSHAPE 2013中文教程11-Shading-ModelAnalysis_计算机软件及应用_IT/计算机_专业资料。PowerSHAPE 2013 11 阴影和模型分析 11. 阴影和模型分析 基本阴影选项点击...
PowerSHAPE 2013中文教程13-Help and Shortcuts.pdf
PowerSHAPE 2013中文教程13-Help and Shortcuts - PowerSHAPE 2013 13 帮助和快捷键 13. 帮助和快捷键 帮助菜单 帮助菜单中提供了和...
powershape培训教程.pdf
powershape培训教程 - PowerSHAPE 4 教程 Trainin
powershape中文教程简介09-线框构建曲面.pdf
powershape中文教程简介09-线框构建曲面_机械/仪表_工程科技_专业资料。powershape中文教程PowerSHAPE 9. 由线框构建曲面驱动曲线和截面曲线 中脊线 驱动曲线可以定义...
powershape中文教程12-编辑曲面.pdf
powershape中文教程12-编辑曲面_机械/仪表_工程科技_专业资料。powershape中文教程PowerSHAPE 12. 编辑曲面编辑曲面曲面可作为标准体素编辑,也可作为 PowerSurface 编辑...
PowerSHAPE 2013中文教程05-Surface Modelling.pdf
PowerSHAPE 2013中文教程05-Surface Modelling - PowerSHAPE 2013 5 曲面建模 5. 曲面建模 什么是曲面? 曲面可认为是跨过 2D 或 ...
powershape中文教程简介07-层.pdf
powershape中文教程powershape中文教程隐藏>> P
PowerSHAPE 2013中文教程04-Solid Modelling.pdf
PowerSHAPE 2013中文教程04-Solid Modelling - PowerSHAPE 2013 4 实体建模 4. 实体建模 简介 实体建模使用了一种和曲面建模完全不同的方...
PowerSHAPE 2013中文教程02-Wireframe.pdf
PowerSHAPE 2013中文教程02-Wireframe - PowerSHAPE 2013 2 线框造型 2. 线框造型 简介 PowerSHAPE可在二维和三维空间内产生点, 直...
PowerSHAPE 2013中文教程12-Modelling Exercises.pdf
PowerSHAPE 2013中文教程12-Modelling Exercises - PowerSHAPE 2013 12 建模练习 12. 建模练习 暖气阀罩 造型下图所示的暖气阀罩。...
powershape 中文教程教程 17-模具向导.pdf
powershape 中文教程教程 17-模具向导_机械/仪表_工程科技_专业资料。powershape 中文教程教程 PowerSHAPE 17. 自动模具镶嵌块向导简介 PowerSHAPE 中包含有自动模具...
PowerSHAPE 2013中文教程09-Surfaces for Manufacture.pdf
PowerSHAPE 2013中文教程09-Surfaces for Manufacture - PowerSHAPE 2013 9 制造曲面准备 9. 制造曲面准备 简介 分模面和拔模面...
powershape 教程11-golfclub.doc
powershape 教程11-golfclub - 高级 PowerSHAPE 11.高尔夫球棒 高尔夫球棒 11. 高尔夫球棒设计 产生棒头 ? ? ? 打开 PowerSHAPE,产生...
PowerSHAPE使用入门-实体包裹教程A.doc
2 ? 实体包裹教程 1 PowerSHAPE 使用入门 实体包裹教程 1- 使用 ArtCAM 教程的这一部分将演示如何组合使用 ArtCAM Pro 和 PowerSHAPE 来产生一包裹模型。 我们...
PowerSHAPE 2013中文教程10-Levels.pdf
PowerSHAPE 2013中文教程10-Levels - PowerSHAPE 2013 10 层 10. 层 使用层可分组模型元素,从而简化模型几何元素的显示和选取。使用层可将零件的不...
更多相关标签: